Name: International Biosynthetics Toxic Release 1991
Start: 2023-12-7
End: 2023-12-7

International Biosynthetics

Events at this location

Lessons

Industry

Country

Language

LoC

Incident

Hazards

Contributory Factors

Impact

Effects

Equipment

Operation

Material

Live Event Type

Document Type

Topics

Origin

Tag

December

202307DecAll DayInternational Biosynthetics Toxic Release 1991International Biosynthetics Widnes (GB)Lessons:Asset integrity,Operational Integrity,Risk AssessmentIndustry:ChemicalsCountry:United KingdomLanguage:ENLoC:Genuine release Origin: HSE Incident:Gas/vapour/mist/etc release to airHazards:ToxicImpact:HUMAN (Offsite Injuries)Effects:< 100 InjuriesMaterial:PhosgeneTopics:Chemical Reaction

Summary

The International Biosynthetics (IBIS) plant was, at the time of the accident, a wholly owned subsidiary of Shell UK Ltd. and employed some 250 people in the manufacture of fine chemicals.

The release occurred on the phosgene plant at 11:27 hours on 7 December 1991. The batch reaction involved the phosgenation of dimethyl aniline (DMA) in a toluene solution. The process involved the addition of 1 tonne of recycled toluene to the reactor, then as no more recycled toluene was available fresh toluene was to be added. Attempts were made to fill the reactor with 2 tonnes of fresh toluene. The flow indicator showed that the required amount of toluene had been added to the reactor, however a control valve between the pump and the vessel was closed and none of the toluene had been added. A level measurement was available for the vessel but as the process appeared to be proceeding normally this was not checked.

The next stage was to add 20 kg of phosgene to check if any water was present in the reactor. This would have resulted in a temperature rise of the solution. Because there was insufficient toluene in the vessel, the temperature indicator was not in the solution and therefore showed no temperature rise. As there appeared to be no water in the reactor, 0.8 tonnes of phosgene were then added to the vessel. After a shift changeover the next steps in the process were carried out. These were to add 1.6 tonnes of DMA and heat to 65°C. The operating temperature was reached but the temperature continued to rise to well above 100°C. As the pressure increased the pressure control valve, pressure relief valve and bursting disc all operated as designed and relieved the vessel to a scrubbing column. The reaction was more violent than had been predicted and the relief system had insufficient capacity to deal with the pressure rise. This resulted in a connection on the condenser line failing and releasing the contents of the vessel to atmosphere. Fortunately the phosgene had been consumed in the reaction. However, the vapour cloud drifted for 4 km affecting about 60 people and staining some property blue.

KEY ISSUES:
• CONTROL SYSTEMS
• REACTION / PRODUCT TESTING
• RELIEF SYSTEMS / VENT SYSTEMS

Report: https://www.icheme.org/media/13702/release-of-chemicals-from-international-biosynthetics-ltd.pdf

Image Credit: HSE

Learn More

Origin

HSEUK Health & Safety Executive