Name: Bhopal Toxic Release 1984
Start: 2023-12-3
End: 2023-12-3

Bhopal

Events at this location

Lessons

Industry

Country

Language

LoC

Incident

Hazards

Contributory Factors

Impact

Effects

Equipment

Operation

Material

Live Event Type

Document Type

Topics

Origin

Tag

December

202303DecAll DayBhopal Toxic Release 1984Union Carbide Bhopal Madhya Pradesh (IN)Lessons:Asset integrity,Control of Work,Emergency Preparedness,Management of Change,Risk Assessment,Stakeholder EngagementIndustry:ChemicalsCountry:IndiaLanguage:ENLoC:Genuine release Origin: HSE Incident:Gas/vapour/mist/etc release to airHazards:Corrosive,Flammable,ToxicImpact:HUMAN (Offsite Fatalities)Effects:> 100 FatalitiesMaterial:Methyl IsocyanateTopics:Chemical Reaction

Summary

In the early hours of 3 December 1984 a relief valve on a storage tank containing highly toxic methyl isocyanate (MIC) lifted. A cloud of MIC gas was released which drifted onto nearby housing.

Prior to this, at 23.00 hrs on 2 December, an operator noticed the pressure inside the storage tank to be higher than normal but not outside the working pressure of the tank. At the same time a MIC leak was reported near the vent gas scrubber (VGS). At 00.15hrs a MIC release in the process area was reported. The pressure inside the storage tank was rising rapidly so the operator went outside to the tank. Rumbling sounds were heard from the tank and a screeching noise from the safety valve. Radiated heat could also be felt from the tank.
Attempts were made to switch on the VGS but this was not in operational mode.

Approximately 2,000 people died within a short period and tens of thousands were injured, overwhelming the emergency services. This was further compounded by the fact that the hospitals were unaware as to which gas was involved or what its effects were. The exact numbers of dead and injured are uncertain, as people have continued to die of the effects over a period of years.

The severity of this accident makes it the worst recorded within the chemical industry.

KEY ISSUES:
• PLANT MODIFICATION / CHANGE PROCEDURES
• REACTION / PRODUCT TESTING
• DESIGN CODES – PLANT
• MAINTENANCE PROCEDURES
• EMERGENCY RESPONSE / SPILL CONTROL

Image Credit: No credit